German Practice Management FHIR Profiles (R4)
0.71.0 - STU1 DE

German Practice Management FHIR Profiles (R4) - Local Development build (v0.71.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: PraxisBGClaimDE - Detailed Descriptions

Active as of 2026-05-30

Definitions for the praxis-bg-claim-de resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Claim
Definition

A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

ShortClaim, Pre-determination or Pre-authorization
Comments

The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
praxis-bg-claim-preliminary-required: A BG final claim must reference at least one preliminary billing claim via Claim.related.claim. (related.where(claim.exists()).count() >= 1)
2. Claim.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Claim.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Claim.status
Definition

The status of the resource instance.

ShortStatus of the claimactive | cancelled | draft | entered-in-error
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

A code specifying the state of the resource instance.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Claim.type
Definition

The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

ShortClaim type: professionalCategory or discipline
Comments

The majority of jurisdictions use: oral, pharmacy, vision, professional and institutional, or variants on those terms, as the general styles of claims. The valueset is extensible to accommodate other jurisdictional requirements.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodeshttp://hl7.org/fhir/ValueSet/claim-type|4.0.1
(extensible to http://hl7.org/fhir/ValueSet/claim-type|4.0.1)

The type or discipline-style of the claim.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Claim type determine the general sets of business rules applied for information requirements and adjudication.

Pattern Value{
  "coding" : [{
    "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
    "code" : "professional"
  }]
}
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Claim.subType
Definition

A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

ShortBilling claim subtype: bg (BG/DGUV final)More granular claim type
Comments

This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

Control10..1
BindingFor example codes, see ExampleClaimSubTypeCodeshttp://hl7.org/fhir/ValueSet/claim-subtype|4.0.1
(example to http://hl7.org/fhir/ValueSet/claim-subtype|4.0.1)

A more granular claim typecode.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Some jurisdictions need a finer grained claim type for routing and adjudication.

Pattern Value{
  "coding" : [{
    "system" : "https://fhir.cognovis.de/praxis/CodeSystem/billing-claim-subtype",
    "code" : "bg"
  }]
}
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Claim.use
Definition

A code to indicate whether the nature of the request is: to request adjudication of products and services previously rendered; or requesting authorization and adjudication for provision in the future; or requesting the non-binding adjudication of the listed products and services which could be provided in the future.

Shortclaim — this is the final submitted BG billing claimclaim | preauthorization | predetermination
Control1..1
BindingThe codes SHALL be taken from Usehttp://hl7.org/fhir/ValueSet/claim-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/claim-use|4.0.1)

The purpose of the Claim: predetermination, preauthorization, claim.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

This element is required to understand the nature of the request for adjudication.

Pattern Valueclaim
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Claim.patient
Definition

The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

ShortPatientThe recipient of the products and services
Control1..1
TypeReference(Patient)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Claim.created
Definition

The date this resource was created.

ShortClaim creation dateResource creation date
Comments

This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

Control1..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to record a timestamp for use by both the recipient and the issuer.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Claim.insurer
Definition

The Insurer who is target of the request.

ShortBG or DGUV insurerTarget
Control0..1
TypeReference(Organization)
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Claim.provider
Definition

The provider which is responsible for the claim, predetermination or preauthorization.

ShortTreating practitioner or organizationParty responsible for the claim
Comments

Typically this field would be 1..1 where this party is responsible for the claim but not necessarily professionally responsible for the provision of the individual products and services listed below.

Control1..1
TypeReference(Practitioner, PractitionerRole, Organization)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Claim.priority
Definition

The provider-required urgency of processing the request. Typical values include: stat, routine deferred.

ShortProcess priorityDesired processing ugency
Comments

If a claim processor is unable to complete the processing as per the priority then they should generate and error and not process the request.

Control1..1
BindingFor example codes, see ProcessPriorityCodeshttp://hl7.org/fhir/ValueSet/process-priority|4.0.1
(example to http://hl7.org/fhir/ValueSet/process-priority|4.0.1)

The timeliness with which processing is required: stat, normal, deferred.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Claim.related
Definition

Other claims which are related to this claim such as prior submissions or claims for related services or for the same event.

ShortExactly one reference to PraxisPreliminaryBillingClaimDE — requiredPrior or corollary claims
Comments

For example, for the original treatment and follow-up exams.

Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

For workplace or other accidents it is common to relate separate claims arising from the same event.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Claim.related.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Claim.related.claim
Definition

Reference to a related claim.

ShortReference to PraxisPreliminaryBillingClaimDE — mandatory, typedReference to the related claim
Control10..1
TypeReference(Praxis Preliminary Billing Claim DE, Claim)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

For workplace or other accidents it is common to relate separate claims arising from the same event.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Claim.related.relationship
Definition

A code to convey how the claims are related.

ShortRelationship codeHow the reference claim is related
Comments

For example, prior claim or umbrella.

Control0..1
BindingFor example codes, see ExampleRelatedClaimRelationshipCodeshttp://hl7.org/fhir/ValueSet/related-claim-relationship|4.0.1
(example to http://hl7.org/fhir/ValueSet/related-claim-relationship|4.0.1)

Relationship of this claim to a related Claim.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Some insurers need a declaration of the type of relationship.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Claim.diagnosis
Definition

Optional echoed Behandlungsdiagnosen from the preliminary billing claim. Each entry references one source PraxisCondition when available; otherwise diagnosisCodeableConcept may carry the billing diagnosis. Dedupe is over the exact billing tuple only: ICD code, Diagnosesicherheit, Seitenlokalisation, and Mehrfachcodierungskennzeichen.


Information about diagnoses relevant to the claim items.

ShortEchoed quarterly treatment diagnoses for billingPertinent diagnosis information
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Required for the adjudication by provided context for the services and product listed.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Claim.diagnosis.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
36. Claim.diagnosis.sequence
Definition

A number to uniquely identify diagnosis entries.

ShortStable diagnosis sequence within the final claimDiagnosis instance identifier
Comments

Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

Control1..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summaryfalse
Requirements

Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Claim.diagnosis.diagnosis[x]
Definition

The nature of illness or problem in a coded form or as a reference to an external defined Condition.

ShortNature of illness or problem
Control1..1
BindingFor example codes, see ICD-10Codeshttp://hl7.org/fhir/ValueSet/icd-10|4.0.1
(example to http://hl7.org/fhir/ValueSet/icd-10|4.0.1)

Example ICD10 Diagnostic codes.

TypeChoice of: CodeableConcept, Reference(Condition)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

Provides health context for the evaluation of the products and/or services.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Claim.diagnosis.diagnosis[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
  • 40. Claim.diagnosis.diagnosis[x]:diagnosisReference
    Slice NamediagnosisReference
    Definition

    The nature of illness or problem in a coded form or as a reference to an external defined Condition.

    ShortSource PraxisCondition for this billing diagnosis tupleNature of illness or problem
    Control01..1
    TypeReference(Praxis Condition, Condition), CodeableConcept
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Provides health context for the evaluation of the products and/or services.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Claim.diagnosis.diagnosis[x]:diagnosisCodeableConcept
    Slice NamediagnosisCodeableConcept
    Definition

    The nature of illness or problem in a coded form or as a reference to an external defined Condition.

    ShortBilling diagnosis code when no source Condition reference is availableNature of illness or problem
    Control01..1
    BindingFor example codes, see ICD-10Codeshttp://hl7.org/fhir/ValueSet/icd-10|4.0.1
    (example to http://hl7.org/fhir/ValueSet/icd-10|4.0.1)

    Example ICD10 Diagnostic codes.

    TypeCodeableConcept, Reference(Condition)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Provides health context for the evaluation of the products and/or services.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Claim.insurance
    Definition

    Financial instruments for reimbursement for the health care products and services specified on the claim.

    ShortBG/DGUV insurance coveragePatient insurance information
    Comments

    All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

    Control1..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    At least one insurer is required for a claim to be a claim.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Claim.insurance.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    48. Claim.insurance.sequence
    Definition

    A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

    ShortInsurance instance identifier
    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    To maintain order of the coverages.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    50. Claim.insurance.focal
    Definition

    A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

    ShortCoverage to be used for adjudication
    Comments

    A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

    Control1..1
    Typeboolean
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    To identify which coverage in the list is being used to adjudicate this claim.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    52. Claim.insurance.coverage
    Definition

    Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

    ShortInsurance information
    Control1..1
    TypeReference(Coverage)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Required to allow the adjudicator to locate the correct policy and history within their information system.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Claim.item
    Definition

    A claim line. Either a simple product or service or a 'group' of details which can each be a simple items or groups of sub-details.

    ShortNot allowed: item lines belong in the preliminary billing claimProduct or service provided
    Control0..0*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    The items to be processed for adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be foundhere

    0. Claim
    Invariantspraxis-bg-claim-preliminary-required: A BG final claim must reference at least one preliminary billing claim via Claim.related.claim. (related.where(claim.exists()).count() >= 1)
    2. Claim.status
    ShortStatus of the claim
    Must Supporttrue
    4. Claim.type
    ShortClaim type: professional
    Must Supporttrue
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
        "code" : "professional"
      }]
    }
    6. Claim.subType
    ShortBilling claim subtype: bg (BG/DGUV final)
    Control1..?
    Must Supporttrue
    Pattern Value{
      "coding" : [{
        "system" : "https://fhir.cognovis.de/praxis/CodeSystem/billing-claim-subtype",
        "code" : "bg"
      }]
    }
    8. Claim.use
    Shortclaim — this is the final submitted BG billing claim
    Must Supporttrue
    Pattern Valueclaim
    10. Claim.patient
    ShortPatient
    Must Supporttrue
    12. Claim.created
    ShortClaim creation date
    Must Supporttrue
    14. Claim.insurer
    ShortBG or DGUV insurer
    Must Supporttrue
    16. Claim.provider
    ShortTreating practitioner or organization
    Must Supporttrue
    18. Claim.priority
    ShortProcess priority
    Must Supporttrue
    20. Claim.related
    ShortExactly one reference to PraxisPreliminaryBillingClaimDE — required
    Control1..1
    Must Supporttrue
    22. Claim.related.claim
    ShortReference to PraxisPreliminaryBillingClaimDE — mandatory, typed
    Control1..?
    TypeReference(Praxis Preliminary Billing Claim DE)
    Must Supporttrue
    24. Claim.related.relationship
    ShortRelationship code
    Must Supporttrue
    26. Claim.diagnosis
    Definition

    Optional echoed Behandlungsdiagnosen from the preliminary billing claim. Each entry references one source PraxisCondition when available; otherwise diagnosisCodeableConcept may carry the billing diagnosis. Dedupe is over the exact billing tuple only: ICD code, Diagnosesicherheit, Seitenlokalisation, and Mehrfachcodierungskennzeichen.

    ShortEchoed quarterly treatment diagnoses for billing
    Must Supporttrue
    28. Claim.diagnosis.sequence
    ShortStable diagnosis sequence within the final claim
    Must Supporttrue
    30. Claim.diagnosis.diagnosis[x]
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    SlicingThis element introduces a set of slices on Claim.diagnosis.diagnosis[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ $this
    • 32. Claim.diagnosis.diagnosis[x]:diagnosisReference
      Slice NamediagnosisReference
      ShortSource PraxisCondition for this billing diagnosis tuple
      Control0..1
      TypeReference(Praxis Condition)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Must Supporttrue
      34. Claim.diagnosis.diagnosis[x]:diagnosisCodeableConcept
      Slice NamediagnosisCodeableConcept
      ShortBilling diagnosis code when no source Condition reference is available
      Control0..1
      TypeCodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Must Supporttrue
      36. Claim.insurance
      ShortBG/DGUV insurance coverage
      Must Supporttrue
      38. Claim.insurance.sequence
      Must Supporttrue
      40. Claim.insurance.focal
      Must Supporttrue
      42. Claim.insurance.coverage
      Must Supporttrue
      44. Claim.item
      ShortNot allowed: item lines belong in the preliminary billing claim
      Control0..0

      Guidance on how to interpret the contents of this table can be foundhere

      0. Claim
      Definition

      A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

      ShortClaim, Pre-determination or Pre-authorization
      Comments

      The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      praxis-bg-claim-preliminary-required: A BG final claim must reference at least one preliminary billing claim via Claim.related.claim. (related.where(claim.exists()).count() >= 1)
      2. Claim.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Claim.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Claim.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Claim.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Claim.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Claim.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Claim.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. Claim.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Claim.identifier
      Definition

      A unique identifier assigned to this claim.

      ShortBusiness Identifier for claim
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Summaryfalse
      Requirements

      Allows claims to be distinguished and referenced.

      Alternate NamesClaim Number
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Claim.status
      Definition

      The status of the resource instance.

      ShortStatus of the claim
      Comments

      This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from FinancialResourceStatusCodes
      (required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

      A code specifying the state of the resource instance.

      Typecode
      Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Claim.type
      Definition

      The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

      ShortClaim type: professional
      Comments

      The majority of jurisdictions use: oral, pharmacy, vision, professional and institutional, or variants on those terms, as the general styles of claims. The valueset is extensible to accommodate other jurisdictional requirements.

      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodes
      (extensible to http://hl7.org/fhir/ValueSet/claim-type|4.0.1)

      The type or discipline-style of the claim.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Claim type determine the general sets of business rules applied for information requirements and adjudication.

      Pattern Value{
        "coding" : [{
          "system" : "http://terminology.hl7.org/CodeSystem/claim-type",
          "code" : "professional"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Claim.subType
      Definition

      A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

      ShortBilling claim subtype: bg (BG/DGUV final)
      Comments

      This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

      Control1..1
      BindingFor example codes, see ExampleClaimSubTypeCodes
      (example to http://hl7.org/fhir/ValueSet/claim-subtype|4.0.1)

      A more granular claim typecode.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Some jurisdictions need a finer grained claim type for routing and adjudication.

      Pattern Value{
        "coding" : [{
          "system" : "https://fhir.cognovis.de/praxis/CodeSystem/billing-claim-subtype",
          "code" : "bg"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Claim.use
      Definition

      A code to indicate whether the nature of the request is: to request adjudication of products and services previously rendered; or requesting authorization and adjudication for provision in the future; or requesting the non-binding adjudication of the listed products and services which could be provided in the future.

      Shortclaim — this is the final submitted BG billing claim
      Control1..1
      BindingThe codes SHALL be taken from Use
      (required to http://hl7.org/fhir/ValueSet/claim-use|4.0.1)

      The purpose of the Claim: predetermination, preauthorization, claim.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      This element is required to understand the nature of the request for adjudication.

      Pattern Valueclaim
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Claim.patient
      Definition

      The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

      ShortPatient
      Control1..1
      TypeReference(Patient)
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Claim.billablePeriod
      Definition

      The period for which charges are being submitted.

      ShortRelevant time frame for the claim
      Comments

      Typically this would be today or in the past for a claim, and today or in the future for preauthorizations and predeterminations. Typically line item dates of service should fall within the billing period if one is specified.

      Control0..1
      TypePeriod
      Is Modifierfalse
      Summarytrue
      Requirements

      A number jurisdictions required the submission of the billing period when submitting claims for example for hospital stays or long-term care.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Claim.created
      Definition

      The date this resource was created.

      ShortClaim creation date
      Comments

      This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

      Control1..1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to record a timestamp for use by both the recipient and the issuer.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Claim.enterer
      Definition

      Individual who created the claim, predetermination or preauthorization.

      ShortAuthor of the claim
      Control0..1
      TypeReference(Practitioner, PractitionerRole)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Some jurisdictions require the contact information for personnel completing claims.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. Claim.insurer
      Definition

      The Insurer who is target of the request.

      ShortBG or DGUV insurer
      Control0..1
      TypeReference(Organization)
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. Claim.provider
      Definition

      The provider which is responsible for the claim, predetermination or preauthorization.

      ShortTreating practitioner or organization
      Comments

      Typically this field would be 1..1 where this party is responsible for the claim but not necessarily professionally responsible for the provision of the individual products and services listed below.

      Control1..1
      TypeReference(Practitioner, PractitionerRole, Organization)
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      40. Claim.priority
      Definition

      The provider-required urgency of processing the request. Typical values include: stat, routine deferred.

      ShortProcess priority
      Comments

      If a claim processor is unable to complete the processing as per the priority then they should generate and error and not process the request.

      Control1..1
      BindingFor example codes, see ProcessPriorityCodes
      (example to http://hl7.org/fhir/ValueSet/process-priority|4.0.1)

      The timeliness with which processing is required: stat, normal, deferred.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      42. Claim.fundsReserve
      Definition

      A code to indicate whether and for whom funds are to be reserved for future claims.

      ShortFor whom to reserve funds
      Comments

      This field is only used for preauthorizations.

      Control0..1
      BindingFor example codes, see Funds Reservation Codes
      (example to http://hl7.org/fhir/ValueSet/fundsreserve|4.0.1)

      For whom funds are to be reserved: (Patient, Provider, None).

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      In the case of a Pre-Determination/Pre-Authorization the provider may request that funds in the amount of the expected Benefit be reserved ('Patient' or 'Provider') to pay for the Benefits determined on the subsequent claim(s). 'None' explicitly indicates no funds reserving is requested.

      Alternate NamesFund pre-allocation
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      44. Claim.related
      Definition

      Other claims which are related to this claim such as prior submissions or claims for related services or for the same event.

      ShortExactly one reference to PraxisPreliminaryBillingClaimDE — required
      Comments

      For example, for the original treatment and follow-up exams.

      Control1..1
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      For workplace or other accidents it is common to relate separate claims arising from the same event.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      46. Claim.related.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      48. Claim.related.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      50. Claim.related.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      52. Claim.related.claim
      Definition

      Reference to a related claim.

      ShortReference to PraxisPreliminaryBillingClaimDE — mandatory, typed
      Control1..1
      TypeReference(Praxis Preliminary Billing Claim DE)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      For workplace or other accidents it is common to relate separate claims arising from the same event.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      54. Claim.related.relationship
      Definition

      A code to convey how the claims are related.

      ShortRelationship code
      Comments

      For example, prior claim or umbrella.

      Control0..1
      BindingFor example codes, see ExampleRelatedClaimRelationshipCodes
      (example to http://hl7.org/fhir/ValueSet/related-claim-relationship|4.0.1)

      Relationship of this claim to a related Claim.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Some insurers need a declaration of the type of relationship.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      56. Claim.related.reference
      Definition

      An alternate organizational reference to the case or file to which this particular claim pertains.

      ShortFile or case reference
      Comments

      For example, Property/Casualty insurer claim # or Workers Compensation case # .

      Control0..1
      TypeIdentifier
      Is Modifierfalse
      Summaryfalse
      Requirements

      In cases where an event-triggered claim is being submitted to an insurer which requires a reference number to be specified on all exchanges.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      58. Claim.prescription
      Definition

      Prescription to support the dispensing of pharmacy, device or vision products.

      ShortPrescription authorizing services and products
      Control0..1
      TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Required to authorize the dispensing of controlled substances and devices.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      60. Claim.originalPrescription
      Definition

      Original prescription which has been superseded by this prescription to support the dispensing of pharmacy services, medications or products.

      ShortOriginal prescription if superseded by fulfiller
      Comments

      For example, a physician may prescribe a medication which the pharmacy determines is contraindicated, or for which the patient has an intolerance, and therefore issues a new prescription for an alternate medication which has the same therapeutic intent. The prescription from the pharmacy becomes the 'prescription' and that from the physician becomes the 'original prescription'.

      Control0..1
      TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Often required when a fulfiller varies what is fulfilled from that authorized on the original prescription.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      62. Claim.payee
      Definition

      The party to be reimbursed for cost of the products and services according to the terms of the policy.

      ShortRecipient of benefits payable
      Comments

      Often providers agree to receive the benefits payable to reduce the near-term costs to the patient. The insurer may decline to pay the provider and choose to pay the subscriber instead.

      Control0..1
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Requirements

      The provider needs to specify who they wish to be reimbursed and the claims processor needs express who they will reimburse.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      64. Claim.payee.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      66. Claim.payee.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      68. Claim.payee.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      70. Claim.payee.type
      Definition

      Type of Party to be reimbursed: subscriber, provider, other.

      ShortCategory of recipient
      Control1..1
      BindingFor example codes, see Claim Payee Type Codes
      (example to http://hl7.org/fhir/ValueSet/payeetype|4.0.1)

      A code for the party to be reimbursed.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Need to know who should receive payment with the most common situations being the Provider (assignment of benefits) or the Subscriber.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      72. Claim.payee.party
      Definition

      Reference to the individual or organization to whom any payment will be made.

      ShortRecipient reference
      Comments

      Not required if the payee is 'subscriber' or 'provider'.

      Control0..1
      TypeReference(Practitioner, PractitionerRole, Organization, Patient, RelatedPerson)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Need to provide demographics if the payee is not 'subscriber' nor 'provider'.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      74. Claim.referral
      Definition

      A reference to a referral resource.

      ShortTreatment referral
      Comments

      The referral resource which lists the date, practitioner, reason and other supporting information.

      Control0..1
      TypeReference(ServiceRequest)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Some insurers require proof of referral to pay for services or to pay specialist rates for services.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      76. Claim.facility
      Definition

      Facility where the services were provided.

      ShortServicing facility
      Control0..1
      TypeReference(Location)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Insurance adjudication can be dependant on where services were delivered.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      78. Claim.careTeam
      Definition

      The members of the team who provided the products and services.

      ShortMembers of the care team
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Requirements

      Common to identify the responsible and supporting practitioners.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      80. Claim.careTeam.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      82. Claim.careTeam.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      84. Claim.careTeam.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      86. Claim.careTeam.sequence
      Definition

      A number to uniquely identify care team entries.

      ShortOrder of care team
      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Necessary to maintain the order of the care team and provide a mechanism to link individuals to claim details.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      88. Claim.careTeam.provider
      Definition

      Member of the team who provided the product or service.

      ShortPractitioner or organization
      Control1..1
      TypeReference(Practitioner, PractitionerRole, Organization)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Often a regulatory requirement to specify the responsible provider.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      90. Claim.careTeam.responsible
      Definition

      The party who is billing and/or responsible for the claimed products or services.

      ShortIndicator of the lead practitioner
      Comments

      Responsible might not be required when there is only a single provider listed.

      Control0..1
      Typeboolean
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      When multiple parties are present it is required to distinguish the lead or responsible individual.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      92. Claim.careTeam.role
      Definition

      The lead, assisting or supervising practitioner and their discipline if a multidisciplinary team.

      ShortFunction within the team
      Comments

      Role might not be required when there is only a single provider listed.

      Control0..1
      BindingFor example codes, see ClaimCareTeamRoleCodes
      (example to http://hl7.org/fhir/ValueSet/claim-careteamrole|4.0.1)

      The role codes for the care team members.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      When multiple parties are present it is required to distinguish the roles performed by each member.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      94. Claim.careTeam.qualification
      Definition

      The qualification of the practitioner which is applicable for this service.

      ShortPractitioner credential or specialization
      Control0..1
      BindingFor example codes, see ExampleProviderQualificationCodes
      (example to http://hl7.org/fhir/ValueSet/provider-qualification|4.0.1)

      Provider professional qualifications.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Need to specify which qualification a provider is delivering the product or service under.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      96. Claim.supportingInfo
      Definition

      Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

      ShortSupporting information
      Comments

      Often there are multiple jurisdiction specific valuesets which are required.

      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Requirements

      Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

      Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      98. Claim.supportingInfo.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      100. Claim.supportingInfo.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      102. Claim.supportingInfo.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      104. Claim.supportingInfo.sequence
      Definition

      A number to uniquely identify supporting information entries.

      ShortInformation instance identifier
      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      106. Claim.supportingInfo.category
      Definition

      The general class of the information supplied: information; exception; accident, employment; onset, etc.

      ShortClassification of the supplied information
      Comments

      This may contain a category for the local bill type codes.

      Control1..1
      BindingFor example codes, see ClaimInformationCategoryCodes
      (example to http://hl7.org/fhir/ValueSet/claim-informationcategory|4.0.1)

      The valuset used for additional information category codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      108. Claim.supportingInfo.code
      Definition

      System and code pertaining to the specific information regarding special conditions relating to the setting, treatment or patient for which care is sought.

      ShortType of information
      Control0..1
      BindingFor example codes, see ExceptionCodes
      (example to http://hl7.org/fhir/ValueSet/claim-exception|4.0.1)

      The valuset used for additional information codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Required to identify the kind of additional information.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      110. Claim.supportingInfo.timing[x]
      Definition

      The date when or period to which this information refers.

      ShortWhen it occurred
      Control0..1
      TypeChoice of: date, Period
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      112. Claim.supportingInfo.value[x]
      Definition

      Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

      ShortData to be provided
      Comments

      Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

      Control0..1
      TypeChoice of: boolean, string, Quantity, Attachment, Reference(Resource)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      To convey the data content to be provided when the information is more than a simple code or period.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      114. Claim.supportingInfo.reason
      Definition

      Provides the reason in the situation where a reason code is required in addition to the content.

      ShortExplanation for the information
      Comments

      For example: the reason for the additional stay, or why a tooth is missing.

      Control0..1
      BindingFor example codes, see MissingToothReasonCodes
      (example to http://hl7.org/fhir/ValueSet/missing-tooth-reason|4.0.1)

      Reason codes for the missing teeth.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Needed when the supporting information has both a date and amount/value and requires explanation.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      116. Claim.diagnosis
      Definition

      Optional echoed Behandlungsdiagnosen from the preliminary billing claim. Each entry references one source PraxisCondition when available; otherwise diagnosisCodeableConcept may carry the billing diagnosis. Dedupe is over the exact billing tuple only: ICD code, Diagnosesicherheit, Seitenlokalisation, and Mehrfachcodierungskennzeichen.

      ShortEchoed quarterly treatment diagnoses for billing
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Required for the adjudication by provided context for the services and product listed.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      118. Claim.diagnosis.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      120. Claim.diagnosis.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      122. Claim.diagnosis.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      124. Claim.diagnosis.sequence
      Definition

      A number to uniquely identify diagnosis entries.

      ShortStable diagnosis sequence within the final claim
      Comments

      Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      126. Claim.diagnosis.diagnosis[x]
      Definition

      The nature of illness or problem in a coded form or as a reference to an external defined Condition.

      ShortNature of illness or problem
      Control1..1
      BindingFor example codes, see ICD-10Codes
      (example to http://hl7.org/fhir/ValueSet/icd-10|4.0.1)

      Example ICD10 Diagnostic codes.

      TypeChoice of: CodeableConcept, Reference(Condition)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Requirements

      Provides health context for the evaluation of the products and/or services.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Claim.diagnosis.diagnosis[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
      • type @ $this
      • 128. Claim.diagnosis.diagnosis[x]:diagnosisReference
        Slice NamediagnosisReference
        Definition

        The nature of illness or problem in a coded form or as a reference to an external defined Condition.

        ShortSource PraxisCondition for this billing diagnosis tuple
        Control0..1
        TypeReference(Praxis Condition)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Provides health context for the evaluation of the products and/or services.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        130. Claim.diagnosis.diagnosis[x]:diagnosisCodeableConcept
        Slice NamediagnosisCodeableConcept
        Definition

        The nature of illness or problem in a coded form or as a reference to an external defined Condition.

        ShortBilling diagnosis code when no source Condition reference is available
        Control0..1
        BindingFor example codes, see ICD-10Codes
        (example to http://hl7.org/fhir/ValueSet/icd-10|4.0.1)

        Example ICD10 Diagnostic codes.

        TypeCodeableConcept
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Provides health context for the evaluation of the products and/or services.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        132. Claim.diagnosis.type
        Definition

        When the condition was observed or the relative ranking.

        ShortTiming or nature of the diagnosis
        Comments

        For example: admitting, primary, secondary, discharge.

        Control0..*
        BindingFor example codes, see ExampleDiagnosisTypeCodes
        (example to http://hl7.org/fhir/ValueSet/ex-diagnosistype|4.0.1)

        The type of the diagnosis: admitting, principal, discharge.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Often required to capture a particular diagnosis, for example: primary or discharge.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        134. Claim.diagnosis.onAdmission
        Definition

        Indication of whether the diagnosis was present on admission to a facility.

        ShortPresent on admission
        Control0..1
        BindingFor example codes, see ExampleDiagnosisOnAdmissionCodes
        (example to http://hl7.org/fhir/ValueSet/ex-diagnosis-on-admission|4.0.1)

        Present on admission.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Many systems need to understand for adjudication if the diagnosis was present a time of admission.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        136. Claim.diagnosis.packageCode
        Definition

        A package billing code or bundle code used to group products and services to a particular health condition (such as heart attack) which is based on a predetermined grouping code system.

        ShortPackage billing code
        Comments

        For example DRG (Diagnosis Related Group) or a bundled billing code. A patient may have a diagnosis of a Myocardial Infarction and a DRG for HeartAttack would be assigned. The Claim item (and possible subsequent claims) would refer to the DRG for those line items that were for services related to the heart attack event.

        Control0..1
        BindingFor example codes, see ExampleDiagnosisRelatedGroupCodes
        (example to http://hl7.org/fhir/ValueSet/ex-diagnosisrelatedgroup|4.0.1)

        The DRG codes associated with the diagnosis.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required to relate the current diagnosis to a package billing code that is then referenced on the individual claim items which are specific to the health condition covered by the package code.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        138. Claim.procedure
        Definition

        Procedures performed on the patient relevant to the billing items with the claim.

        ShortClinical procedures performed
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        The specific clinical invention are sometimes required to be provided to justify billing a greater than customary amount for a service.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        140. Claim.procedure.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        142. Claim.procedure.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        144. Claim.procedure.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        146. Claim.procedure.sequence
        Definition

        A number to uniquely identify procedure entries.

        ShortProcedure instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Necessary to provide a mechanism to link to claim details.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        148. Claim.procedure.type
        Definition

        When the condition was observed or the relative ranking.

        ShortCategory of Procedure
        Comments

        For example: primary, secondary.

        Control0..*
        BindingFor example codes, see ExampleProcedureTypeCodes
        (example to http://hl7.org/fhir/ValueSet/ex-procedure-type|4.0.1)

        Example procedure type codes.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Often required to capture a particular diagnosis, for example: primary or discharge.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        150. Claim.procedure.date
        Definition

        Date and optionally time the procedure was performed.

        ShortWhen the procedure was performed
        Control0..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Required for auditing purposes.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        152. Claim.procedure.procedure[x]
        Definition

        The code or reference to a Procedure resource which identifies the clinical intervention performed.

        ShortSpecific clinical procedure
        Control1..1
        BindingFor example codes, see ICD-10ProcedureCodes
        (example to http://hl7.org/fhir/ValueSet/icd-10-procedures|4.0.1)

        Example ICD10 Procedure codes.

        TypeChoice of: CodeableConcept, Reference(Procedure)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Requirements

        This identifies the actual clinical procedure.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        154. Claim.procedure.udi
        Definition

        Unique Device Identifiers associated with this line item.

        ShortUnique device identifier
        Control0..*
        TypeReference(Device)
        Is Modifierfalse
        Summaryfalse
        Requirements

        The UDI code allows the insurer to obtain device level information on the product supplied.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        156. Claim.insurance
        Definition

        Financial instruments for reimbursement for the health care products and services specified on the claim.

        ShortBG/DGUV insurance coverage
        Comments

        All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

        Control1..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        At least one insurer is required for a claim to be a claim.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        158. Claim.insurance.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        160. Claim.insurance.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        162. Claim.insurance.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        164. Claim.insurance.sequence
        Definition

        A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

        ShortInsurance instance identifier
        Control1..1
        TypepositiveInt
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        To maintain order of the coverages.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        166. Claim.insurance.focal
        Definition

        A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

        ShortCoverage to be used for adjudication
        Comments

        A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

        Control1..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        To identify which coverage in the list is being used to adjudicate this claim.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        168. Claim.insurance.identifier
        Definition

        The business identifier to be used when the claim is sent for adjudication against this insurance policy.

        ShortPre-assigned Claim number
        Comments

        Only required in jurisdictions where insurers, rather than the provider, are required to send claims to insurers that appear after them in the list. This element is not required when 'subrogation=true'.

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        TypeIdentifier
        Is Modifierfalse
        Summaryfalse
        Requirements

        This will be the claim number should it be necessary to create this claim in the future. This is provided so that payors may forward claims to other payors in the Coordination of Benefit for adjudication rather than the provider being required to initiate each adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        170. Claim.insurance.coverage
        Definition

        Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

        ShortInsurance information
        Control1..1
        TypeReference(Coverage)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Required to allow the adjudicator to locate the correct policy and history within their information system.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        172. Claim.insurance.businessArrangement
        Definition

        A business agreement number established between the provider and the insurer for special business processing purposes.

        ShortAdditional provider contract number
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Providers may have multiple business arrangements with a given insurer and must supply the specific contract number for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        174. Claim.insurance.preAuthRef
        Definition

        Reference numbers previously provided by the insurer to the provider to be quoted on subsequent claims containing services or products related to the prior authorization.

        ShortPrior authorization reference number
        Comments

        This value is an alphanumeric string that may be provided over the phone, via text, via paper, or within a ClaimResponse resource and is not a FHIR Identifier.

        Control0..*
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Providers must quote previously issued authorization reference numbers in order to obtain adjudication as previously advised on the Preauthorization.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        176. Claim.insurance.claimResponse
        Definition

        The result of the adjudication of the line items for the Coverage specified in this insurance.

        ShortAdjudication results
        Comments

        Must not be specified when 'focal=true' for this insurance.

        Control0..1
        TypeReference(ClaimResponse)
        Is Modifierfalse
        Summaryfalse
        Requirements

        An insurer need the adjudication results from prior insurers to determine the outstanding balance remaining by item for the items in the curent claim.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        178. Claim.accident
        Definition

        Details of an accident which resulted in injuries which required the products and services listed in the claim.

        ShortDetails of the event
        Control0..1
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        When healthcare products and services are accident related, benefits may be payable under accident provisions of policies, such as automotive, etc before they are payable under normal health insurance.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        180. Claim.accident.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        182. Claim.accident.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        184. Claim.accident.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        186. Claim.accident.date
        Definition

        Date of an accident event related to the products and services contained in the claim.

        ShortWhen the incident occurred
        Comments

        The date of the accident has to precede the dates of the products and services but within a reasonable timeframe.

        Control1..1
        Typedate
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Required for audit purposes and adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        188. Claim.accident.type
        Definition

        The type or context of the accident event for the purposes of selection of potential insurance coverages and determination of coordination between insurers.

        ShortThe nature of the accident
        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from ActIncidentCode
        (extensible to http://terminology.hl7.org/ValueSet/v3-ActIncidentCode)

        Type of accident: work place, auto, etc.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Coverage may be dependant on the type of accident.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        190. Claim.accident.location[x]
        Definition

        The physical location of the accident event.

        ShortWhere the event occurred
        Control0..1
        TypeChoice of: Address, Reference(Location)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Requirements

        Required for audit purposes and determination of applicable insurance liability.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        192. Claim.item
        Definition

        A claim line. Either a simple product or service or a 'group' of details which can each be a simple items or groups of sub-details.

        ShortNot allowed: item lines belong in the preliminary billing claim
        Control0..0
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Requirements

        The items to be processed for adjudication.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        247. Claim.total
        Definition

        The total value of the all the items in the claim.

        ShortTotal claim cost
        Control0..1
        TypeMoney
        Is Modifierfalse
        Summaryfalse
        Requirements

        Used for control total purposes.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))